Raspberry Pi LESSON 47: Adding Boxes, Rectangles and Circles on Images in OpenCV
Announcing the Most Awesome Raspberry Pi Lessons of All Times! This time we RUMBLE!
In this class series, we will be using the most excellent Sunfounder Ultimate Raspberry Pi kit, available here: (Affiliate Link)
https://amzn.to/3tSk9Mo
or for our UK friends, https://amzn.to/3I5d401
In this lesson I will show you how to use the Raspberry Pi camera on the Bullseye operating system, in either 32 bit or 64 bit mode. I will show you how to operate the camera using OpenCV. Today I will show you how to annotate your openCV video stream with circles, boxes and rectangles
If you want to grab those cool little straight jumper wires I am using to keep my breadboard builds neat and clean you can snag a box of them here:
https://amzn.to/36NyfHq
If you guys are interested in the oscilloscope I am using, you can pick one up here (affiliate link):
https://amzn.to/3v13Mhl
You guys get your hardware ordered so you can follow along at home!
You will also need a Raspberry Pi. I suggest the Raspberry Pi 4. If you do not already have one, this is the most suitable gear I could find:
The Raspberry Pi’s are sort of pricy right now, so you can look on ebay or elsewhere to see if there are any deals. You will need a SD card. If you do not already have one, this is a good one:
I like using a wireless keyboard and mouse to have fewer wires. You can certainly use your USB keyboard and mouse, but if you want a nice wireless one, this one works on the pi. We demonstrate this by using a button switch to control a LED.
You guys can help me out over at Patreon, and that will help me keep my gear updated, and help me keep this quality content coming:
https://www.patreon.com/PaulMcWhorter
#bullseye
#opencv
#raspberrypi
source
