Fusion 360 for 3D Printing LESSON 24: How to Properly Change the Extruder Nozzle on the Ender 3 V2
In the video I show a USB microscope I use for inspecting prints and nozzles. You can pick up the same microscope here:
This is the spare nozzle kit which I show in the video. These are very low cost nozzles, and makes it practical to routinely swap out your extruder nozzle. I really like the socket wrench that comes with the kit.
You guys can help me out over at Patreon, and that will help me keep my gear updated, and help me keep this quality content coming:
https://www.patreon.com/PaulMcWhorter
In this class we will be using the Creality Ender 3 V2 Printer. Your life and my life will be easier if we are working on the same hardware. You can pick up your printer on amazon at the following link: [affiliate link]
You will also want to stock up on some filament for your printer. I like the eSun PLA. Here is a link to what I am using:
The link shows you can get different colors. I like the orange.
In this lesson I will teach you how to properly replace the extruder nozzle on the Creality Ender 3. The technique I show should be applicable to other models of printers as well. A clean, fresh, undamaged extruder nozzle is the key to improving print quality. The extruders nozzles are low cost so I replace mine often.
[Disclosure of Material Connection: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. This means if you visit the link and purchase the item, I will receive an affiliate commission.]
#crealityender3
#3Dprinting
#fusion360
source
