Fusion 360 for 3D Printing LESSON 26: Install a CR Touch Auto Bed Leveler on Creality Ender 3 V2
This is the link to the CR touch with custom bracket for the creality ender 3 V2 printer. It will work for other printers, but it specifically has a bracket matching the predrilled holes on the ender 3 V2
This is the link to the Jyers firmware for the CR Touch:
https://github.com/jyers/marlin/releases/
In the video I show a USB microscope I use for inspecting prints and nozzles. You can pick up the same microscope here:
This is the spare nozzle kit which I show in the video. These are very low cost nozzles, and makes it practical to routinely swap out your extruder nozzle. I really like the socket wrench that comes with the kit.
You guys can help me out over at Patreon, and that will help me keep my gear updated, and help me keep this quality content coming:
https://www.patreon.com/PaulMcWhorter
In this class we will be using the Creality Ender 3 V2 Printer. Your life and my life will be easier if we are working on the same hardware. You can pick up your printer on amazon at the following link: [affiliate link]
You will also want to stock up on some filament for your printer. I like the eSun PLA. Here is a link to what I am using:
The link shows you can get different colors. I like the orange.
In this lesson I will show you how to install the Creality CR Touch auto bed leveling. I will show how to install the hardware, will show you how to install the Jyers firmware to use the auto bed leveling feature, and then show you how to auto level and we make a test print. This one video shows the entire process.
[Disclosure of Material Connection: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. This means if you visit the link and purchase the item, I will receive an affiliate commission.]
#crealityender3
#3Dprinting
#crtouch
source
